The rear mount on the front subframe was as bad as the others. This one had clearly been repaired before but it rusted badly around it. I really had a job trying to cut this out with limited clearance. The torches were out of the question with the fuel line an inch away. Welding required my pipe sweating pad.
Pieces after the struggle to cut it out. I had to cut back farther than the length of the repair plate.
So I had to lengthen it with a piece of steel. I got it sized the way I wanted and then had to get funky with welding it. Reaching up inside the frame blocked my view so I had to figure out when I was welding the end of that extension plate. I got it but it ain’t pretty.
After all the struggle to get this side I was dreading the next side. I took the bushing out and found it was in pretty good shape! I sprayed it with rust stuff, painted it with Rustoleum, and put in the new bushing. Done with subframe mounts. The ones on the front at the radiator support were okay though the bushings were rusted out inside.